MACHINE APPLIED/LABEL APPLICATIONS 2. Draw/Repeat 1. Copy Position The copy position (or unwind) signifies which direction the copy comes off the roll; positions 5 through 8 are wound in. Please note horizontal vs. vertical. 1 2 3 4 5 6 7 8 When ordering machine applied labels, here’s what you need to know: The draw, or repeat, refers to the distance from the top edge of one label to the top edge of the next label. The length of the label plus the gap equals the repeat. Length + Gap = Draw/Repeat Short Draw Example: 1" x 1/2" Label 1/2" Length + 1/8" Gap = 5/8" Draw/Repeat Represents Inner Cardboard Core 1" Length + 1/8" Gap = 1-1/8" Draw/Repeat Long Draw Example: 1/2" x 1"Label 61 3. Core Information Cores are available in two standard sizes, 1" and 3" in diameter. Cores must be flush with the edge of the roll. Please note the core size and the maximum outside diameter (OD) of the roll when ordering. Additional core sizes are available for an additional charge. Outside Diameter The outside diameter is important for fitting the roll on the labeling machine. Core r Ensure the Right Product for Your Specific Use 1. What are you applying the product to? Labels/Stickers/Decals: • If applying indoors see our selection of permanent and removable materials on page 3. For labels used in a specific way (i.e., beer labels), stocks are listed on each product page. *Tip – If needing moisture protection on your indoor label be sure to include a UV Varnish. • If applying to an outdoor surface see our selection of material choices on Outdoor Decal page 43. *Tip – Gloss lamination is included on Outdoor Decals but if you want to extend the fade resistance of your inks we suggest the Sunscreen Lamination. Packaging Tape: • Water-Activated Packaging Tape closes boxes up to 30 pounds and is available in Brown or White Kraft. See page 22. • Adhesive Packaging Tape closes boxes up to 20 pounds and is available in Clear and White (semi-opaque). See page 23. 2. Quantity Needed? Labels/Stickers/Decals: • You can find the label quantities available on each product page. If your quantity exceeds those listed, simply contact us for a quote. Packaging Tape: • Water-Activated Packaging Tape is measured in feet. Choose 375’ or 450’. • Adhesive Packaging Tape is measured in yards. (1 yard = 3 feet) Our standard rolls are 110 yards. 4. What size and shape? Labels/Stickers/Decals: • Available sizes and shapes are shown in each category throughout the catalog. The die number referenced by each option lets us know exactly which size/ shape you’d like. Simply reference your die number when placing your order. Don’t see the size/shape you’re looking for? No problem. Contact us for assistance anytime. *Tip – For Square Cut labels (pages 13 and 17) or freeform™ (pages 39 and 41) just let us know your square inch dimensions. 5. What imprint color(s)? Labels/Stickers/Decals: • See page 3 for imprint choices as well as additional information in each product category. *Tip - When printing in full color, white is considered an additional ink. Packaging Tape: • Available in spot color only. See pages 22-23. 6. Will the product be hand or machine applied? Labels/Stickers/Decals: • If machine applied or hand applied with a special request, include core size, rewind direction, outside roll diameter, or number of labels per roll. *Tip – Additional fees may apply if lower than 500/roll or pack. Packaging Tape: • Water-Activated Packaging Tape is typically moistened and cut using a tabletop machine. • Adhesive Packaging Tape is typically applied using a handheld tape gun. These are readily available at several retail stores. 7. Do you have any special shipping or packaging requirements? Let us know if you need to drop ship, shrink wrap, have an exact quantity per box, or need us to apply outer box labels, and we can provide a quote.
RkJQdWJsaXNoZXIy MjUyNjgxNQ==